If you like these products why not visit our dedicated energy saving products site EnergySavers.ie and start saving today! EnergySavers.ie aims to bring you best products in energy saving, to help you reduce your carbon footprint and save money at the same time!
Our partner, CP Electronics, have been developing and manufacturing electronic energy saving controls for lighting, heating and ventilation for almost 40 years.
Our stock of Energy Saving Controls includes:
- Ceiling Mounted Presence Detectors
- Microwave Presence Detectors
- Wall Mounted PIR Sensors
- Time Lag Switches
- Lighting Control Systems
- Multi Range Timers
- HVAC Controls
- Emergency Lighting Test Switches
- Light Level Controls
- Absence or Presence Detection
ByeBye Standy Detector
Reduce your monthly electric utility power bill by reducing wasted energy or "standby power".
Bye Bye Standby works by completely cutting power to the devices plugged into it when they're not in use, thus saving the power that these devices would otherwise have consumed in Standby Mode.
Download the ByeBye Standby Starter Pack Brochure »
Owl Wireless Energy Monitor
Keeping an eye on your electrical usage has never been easier with the new OWL Wireless Energy Monitor. This revolutionary device, which aims to help in the fight against climate change, is set to show millions of people just how much electricity they waste in their homes, whilst highlighting the money that can be saved as a result.
Download the Owl Energy Monitor brochure »
Ceiling Mounted Presence Detectors
Spir FC
The SPIR-F/C presence detector switches are designed to provide automatic control of lighting, heating or ventilation loads.
They detect movement using a PIR sensor and turn the load on.
Download the Spir FC brochure »
EBMPIR SA
The EBMPIR-SA series of miniature PIR (passive infrared) presence detec-tors provide automatic control of lighting loads with optional manual control.
The unit comes complete with a flush fixing clip allowing unobtrusive flush mounting into ceiling tiles or solid ceilings.
Download the EBMPIR SA brochure »
View our full range of Ceiling Mounted PIR Sensors »
Microwave Presence Detectors
(Dimming/Non-Dimming)
MWS Wall and Ceiling
The MWS1 series of microwave presence detector switches are designed to provide automatic control of lighting, heating or ventilation loads. The MWS1 detects movement using a highly sensitive microwave detector.
Download the MSW1 Ceiling brochure »
Download the MSW1 Wall brochure »
MWS-3 Multisense Microwave Presence Detector
The EBMPIR-SA series of miniature PIR (passive infrared) presence detec-tors provide automatic control of lighting loads with optional manual control.
The unit comes complete with a flush fixing clip allowing unobtrusive flush mounting into ceiling tiles or solid ceilings.
Download the MWS-3 Multisense Microwave Presence Detector brochure »
View our full range of Microwave Presence Sensors »
Wall Mounted PIR Sensors
Green-I
The use of a dimmer switch can save 20% on your average electricity costs when compared to using a conventional switch.
The combined use of a dimmer switch and a movement sensor can save 36% on your average electricity costs when compared to using a conventional switch.
Download the Green-I brochure »
EBMPIR
The EBMPIR series of miniature PIR (passive infrared) presence detectors provide automatic control of lighting loads with optional manual control.
The unit detects movement using a PIR sensor and turns the load on.
Download the EBMPIR brochure »
View our full range of Wall Mounted PIR Sensors »
Time Lag Switches
Ellipse
The ELLIPSE and KH2 time lag switches are a quick and effective way to reduce energy consumption for lighting applications. These units do not require a neutral connection, therefore they can be used to replace an existing light switch.
Download the Ellipse brochure »
KH 1
Pressing the button brings the lights on; the lights will then switch off automatically after a preset time period has elapsed.
These units do not require a neutral connection, therefore they can be used to replace an existing light switch.
View our full range of Time Lag Switches »
Lighting Control Systems
(DSI/DALI)
LMS
The LMS-MIN-LCM series of lighting control modules (LCMs) are used as part of the LMS Lighting Management System to switch lighting.
They have a single addressable output port for switching, whilst the DIM model provides DSI and DALI dimming signals for dimmable luminaires.
Vitesse
The Vitesse lighting distribution system is a cost effective method of providing power and control for lighting installations in industrial, commercial and retail buildings.
The Vitesse marshalling box is designed for ease of installation: the mains input is connected using the spacious wiring compartment; all control inputs and outputs are pluggable using industry standard connectors.
The marshalling box can be configured in a 2x5 or 1x10 format.
Download the Vitesse Ceiling Detector brochure »
Download the Vitesse Microwave Presence Detector brochure »
Multi Range Timers
RBT2
The RBT2 run back timer is a high output electronic timer which provides control for a wide range of loads.
The unit allows an appliance to be powered for a set time period which can be adjusted by the user.
MRT16-TA
Multiple timing ranges come as standard to allow the time out period to be set accurately. Time setting is achieved using switches and a thumb-wheel at the rear of the unit.
Several modes of operation are selectable using switches. Push button activation with optional external trigger.
Download the MRT16-TA brochure »
View our full range of Multi Range Timers »
HVAC Controls
Enerstat T
The ENERSTAT-T electronic thermostat will accurately maintain the temperature of a room at two levels (or setpoints): the setback temperature and the boost temperature. The ENERSTAT-T can directly switch a heating load making it ideal for the control of panel heaters.
Download the Enerstat T brochure »
Enerstat PIR
The ENERSTAT-PIR electronic thermostat will accurately maintain the temperature of a room at two levels (or setpoints): the setback temperature and the boost temperature. The boost temperature is automatically selected using a PIR (passive infrared) occupancy detector which detects moving body heat.
Download the Enerstat PIR brochure »
View our full range of HVAC Controls »
Emergency Lighting Test Switches
ELT 1
A plate mounted economy key switch provides a cost effective solution for the testing of emergency lighting. The circuit is interrupted using the secure key switch. The switch plate is manufactured in a high impact material making it suitable for installations where previously a metal finish may have been required.
ELT 10
The ELT10 emergency lighting test switch is designed to test the function of emergency luminaires.
A key switch is used to interrupt the supply to the luminaires for a pre-programmed period of time.
Download the ELT 10 brochure »
View our full range of Emergency Lighting Test Switches »
Light Level Controls
Our expertise can help you reduce your carbon footprint and your energy bills at the same time.
Our high quality energy saving controls are all manufactured in the UK to ISO 9001:2000 standard and carry the CE mark where relevant. CP's energy management products can help you comply with Part L of the Building Regulations and reduce the impact of the Climate Change Levy.
Other benefits we offer include:
- Design service
- Full technical support
- Fast, reliable delivery
- Commissioning
ALC15
The ALC15 twilight switch will turn artificial lighting on when the ambient light falls below a preset level.
The artificial lighting will then be turned off either when the ambient light exceeds the preset level (auto off) or after a preset time delay (timed off).
View our full range of Light Level Controls »
Absence or Presence Detection
When specifying occupancy detectors, the choice between presence and absence detection for different spaces can make a big difference in user-friendliness and the amount of energy saved. Our recommendations on the choice between Absence or Presence Detection can be found here are designed to help with this decision.
We have based our recommendations on the BRE Digest 498, a guidance document for selecting lighting controls in order to comply with the Building Regulations Part L2A and L2B.
It classifies six different types of area when considering lighting control by looking at the way the space is used and how people expect the lighting to be controlled.